# magic-string

Suppose you have some source code. You want to make some light modifications to it - replacing a few characters here and there, wrapping it with a header and footer, etc - and ideally you'd like to generate a [source map](https://docs.google.com/document/d/1U1RGAehQwRypUTovF1KRlpiOFze0b-_2gc6fAH0KY0k/) at the end of it. You've thought about using something like [recast](https://github.com/benjamn/recast) (which allows you to generate an AST from some JavaScript, manipulate it, and reprint it with a sourcemap without losing your comments and formatting), but it seems like overkill for your needs (or maybe the source code isn't JavaScript). Your requirements are, frankly, rather niche. But they're requirements that I also have, and for which I made magic-string. It's a small, fast utility for manipulating strings and generating sourcemaps. ## Installation magic-string works in both node.js and browser environments. For node, install with npm: ```bash npm i magic-string ``` To use in browser, grab the [magic-string.umd.js](https://unpkg.com/magic-string/dist/magic-string.umd.js) file and add it to your page: ```html ``` (It also works with various module systems, if you prefer that sort of thing - it has a dependency on [vlq](https://github.com/Rich-Harris/vlq).) ## Usage These examples assume you're in node.js, or something similar: ```js import MagicString from 'magic-string'; import fs from 'fs'; const s = new MagicString('problems = 99'); s.update(0, 8, 'answer'); s.toString(); // 'answer = 99' s.update(11, 13, '42'); // character indices always refer to the original string s.toString(); // 'answer = 42' s.prepend('var ').append(';'); // most methods are chainable s.toString(); // 'var answer = 42;' const map = s.generateMap({ source: 'source.js', file: 'converted.js.map', includeContent: true, }); // generates a v3 sourcemap fs.writeFileSync('converted.js', s.toString()); fs.writeFileSync('converted.js.map', map.toString()); ``` You can pass an options argument: ```js const s = new MagicString(someCode, { // these options will be used if you later call `bundle.addSource( s )` - see below filename: 'foo.js', indentExclusionRanges: [ /*...*/ ], // mark source as ignore in DevTools, see below #Bundling ignoreList: false, // adjust the incoming position - see below offset: 0, }); ``` ## Properties ### s.offset Sets the offset property to adjust the incoming position for the following APIs: `slice`, `update`, `overwrite`, `appendLeft`, `prependLeft`, `appendRight`, `prependRight`, `move`, `reset`, and `remove`. Example usage: ```ts const s = new MagicString('hello world', { offset: 0 }); s.offset = 6; s.slice() === 'world'; ``` ## Methods ### s.addSourcemapLocation( index ) Adds the specified character index (with respect to the original string) to sourcemap mappings, if `hires` is `false` (see below). ### s.append( content ) Appends the specified content to the end of the string. Returns `this`. ### s.appendLeft( index, content ) Appends the specified `content` at the `index` in the original string. If a range _ending_ with `index` is subsequently moved, the insert will be moved with it. Returns `this`. See also `s.prependLeft(...)`. ### s.appendRight( index, content ) Appends the specified `content` at the `index` in the original string. If a range _starting_ with `index` is subsequently moved, the insert will be moved with it. Returns `this`. See also `s.prependRight(...)`. ### s.clone() Does what you'd expect. ### s.generateDecodedMap( options ) Generates a sourcemap object with raw mappings in array form, rather than encoded as a string. See `generateMap` documentation below for options details. Useful if you need to manipulate the sourcemap further, but most of the time you will use `generateMap` instead. ### s.generateMap( options ) Generates a [version 3 sourcemap](https://docs.google.com/document/d/1U1RGAehQwRypUTovF1KRlpiOFze0b-_2gc6fAH0KY0k/edit). All options are, well, optional: - `file` - the filename where you plan to write the sourcemap - `source` - the filename of the file containing the original source - `includeContent` - whether to include the original content in the map's `sourcesContent` array - `hires` - whether the mapping should be high-resolution. Hi-res mappings map every single character, meaning (for example) your devtools will always be able to pinpoint the exact location of function calls and so on. With lo-res mappings, devtools may only be able to identify the correct line - but they're quicker to generate and less bulky. You can also set `"boundary"` to generate a semi-hi-res mappings segmented per word boundary instead of per character, suitable for string semantics that are separated by words. If sourcemap locations have been specified with `s.addSourcemapLocation()`, they will be used here. The returned sourcemap has two (non-enumerable) methods attached for convenience: - `toString` - returns the equivalent of `JSON.stringify(map)` - `toUrl` - returns a DataURI containing the sourcemap. Useful for doing this sort of thing: ```js code += '\n//# sourceMappingURL=' + map.toUrl(); ``` ### s.hasChanged() Indicates if the string has been changed. ### s.indent( prefix[, options] ) Prefixes each line of the string with `prefix`. If `prefix` is not supplied, the indentation will be guessed from the original content, falling back to a single tab character. Returns `this`. The `options` argument can have an `exclude` property, which is an array of `[start, end]` character ranges. These ranges will be excluded from the indentation - useful for (e.g.) multiline strings. ### s.insertLeft( index, content ) **DEPRECATED** since 0.17 – use `s.appendLeft(...)` instead ### s.insertRight( index, content ) **DEPRECATED** since 0.17 – use `s.prependRight(...)` instead ### s.isEmpty() Returns true if the resulting source is empty (disregarding white space). ### s.locate( index ) **DEPRECATED** since 0.10 – see [#30](https://github.com/Rich-Harris/magic-string/pull/30) ### s.locateOrigin( index ) **DEPRECATED** since 0.10 – see [#30](https://github.com/Rich-Harris/magic-string/pull/30) ### s.move( start, end, index ) Moves the characters from `start` and `end` to `index`. Returns `this`. ### s.overwrite( start, end, content[, options] ) Replaces the characters from `start` to `end` with `content`, along with the appended/prepended content in that range. The same restrictions as `s.remove()` apply. Returns `this`. The fourth argument is optional. It can have a `storeName` property — if `true`, the original name will be stored for later inclusion in a sourcemap's `names` array — and a `contentOnly` property which determines whether only the content is overwritten, or anything that was appended/prepended to the range as well. It may be preferred to use `s.update(...)` instead if you wish to avoid overwriting the appended/prepended content. ### s.prepend( content ) Prepends the string with the specified content. Returns `this`. ### s.prependLeft ( index, content ) Same as `s.appendLeft(...)`, except that the inserted content will go _before_ any previous appends or prepends at `index` ### s.prependRight ( index, content ) Same as `s.appendRight(...)`, except that the inserted content will go _before_ any previous appends or prepends at `index` ### s.replace( regexpOrString, substitution ) String replacement with RegExp or string. When using a RegExp, replacer function is also supported. Returns `this`. ```ts import MagicString from 'magic-string'; const s = new MagicString(source); s.replace('foo', 'bar'); s.replace(/foo/g, 'bar'); s.replace(/(\w)(\d+)/g, (_, $1, $2) => $1.toUpperCase() + $2); ``` The differences from [`String.replace`](<(https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/String/replace)>): - It will always match against the **original string** - It mutates the magic string state (use `.clone()` to be immutable) ### s.replaceAll( regexpOrString, substitution ) Same as `s.replace`, but replace all matched strings instead of just one. If `regexpOrString` is a regex, then it must have the global (`g`) flag set, or a `TypeError` is thrown. Matches the behavior of the builtin [`String.property.replaceAll`](https://developer.mozilla.org/en-US/docs/Web/JavaScript/Reference/Global_Objects/String/replaceAll). Returns `this`. ### s.remove( start, end ) Removes the characters from `start` to `end` (of the original string, **not** the generated string). Removing the same content twice, or making removals that partially overlap, will cause an error. Returns `this`. ### s.reset( start, end ) Resets the characters from `start` to `end` (of the original string, **not** the generated string). It can be used to restore previously removed characters and discard unwanted changes. ### s.slice( start, end ) Returns the content of the generated string that corresponds to the slice between `start` and `end` of the original string. Throws error if the indices are for characters that were already removed. ### s.snip( start, end ) Returns a clone of `s`, with all content before the `start` and `end` characters of the original string removed. ### s.toString() Returns the generated string. ### s.trim([ charType ]) Trims content matching `charType` (defaults to `\s`, i.e. whitespace) from the start and end. Returns `this`. ### s.trimStart([ charType ]) Trims content matching `charType` (defaults to `\s`, i.e. whitespace) from the start. Returns `this`. ### s.trimEnd([ charType ]) Trims content matching `charType` (defaults to `\s`, i.e. whitespace) from the end. Returns `this`. ### s.trimLines() Removes empty lines from the start and end. Returns `this`. ### s.update( start, end, content[, options] ) Replaces the characters from `start` to `end` with `content`. The same restrictions as `s.remove()` apply. Returns `this`. The fourth argument is optional. It can have a `storeName` property — if `true`, the original name will be stored for later inclusion in a sourcemap's `names` array — and an `overwrite` property which defaults to `false` and determines whether anything that was appended/prepended to the range will be overwritten along with the original content. `s.update(start, end, content)` is equivalent to `s.overwrite(start, end, content, { contentOnly: true })`. ## Bundling To concatenate several sources, use `MagicString.Bundle`: ```js const bundle = new MagicString.Bundle(); bundle.addSource({ filename: 'foo.js', content: new MagicString('var answer = 42;'), }); bundle.addSource({ filename: 'bar.js', content: new MagicString('console.log( answer )'), }); // Sources can be marked as ignore-listed, which provides a hint to debuggers // to not step into this code and also don't show the source files depending // on user preferences. bundle.addSource({ filename: 'some-3rdparty-library.js', content: new MagicString('function myLib(){}'), ignoreList: false, // <-- }); // Advanced: a source can include an `indentExclusionRanges` property // alongside `filename` and `content`. This will be passed to `s.indent()` // - see documentation above bundle .indent() // optionally, pass an indent string, otherwise it will be guessed .prepend('(function () {\n') .append('}());'); bundle.toString(); // (function () { // var answer = 42; // console.log( answer ); // }()); // options are as per `s.generateMap()` above const map = bundle.generateMap({ file: 'bundle.js', includeContent: true, hires: true, }); ``` As an alternative syntax, if you a) don't have `filename` or `indentExclusionRanges` options, or b) passed those in when you used `new MagicString(...)`, you can simply pass the `MagicString` instance itself: ```js const bundle = new MagicString.Bundle(); const source = new MagicString(someCode, { filename: 'foo.js', }); bundle.addSource(source); ``` ## License MIT

c	File Name	Size	T	Date
zip	dist/	10	---	2025-08-12 18:34:59
-	LICENSE	1051	%	2025-08-09 20:06:51
-	README.md	12549	md	2025-08-09 20:06:51
-	package.json	1807	json	2025-08-09 20:06:51

🌲 / sam syncthing Code museum-frontend node_modules magic-string

control-panel